Home | About Us | Quality | Engineering & Tooling | Inventory Management | Facilities & Equipment | Request Quote | Contact Us

• Deep Drawing
• Metal Stamping
• Automotive Stampings
• Metal Fabrication & Welding

"We eliminate
the limits of manufacturing"

Equipment For Large and Small Custom Automotive Metal Stamping Process Runs

Luitink Manufacturing, L.L.C., a subsidiary of The Vollrath Company, L.L.C., is a full service, QS-9000 certified company, specializing in the use of progressive and transfer dies for the manufacture of quality custom automotive metal stampings, automotive metal brackets and automotive frame brackets. An assortment of additional equipment is available to complete your manufacturing requirements. Luitink also offers special stamping services for parts that are needed in small quantities. Request a Quote

AUTOMOTIVE METAL STAMPING SECONDARY OPERATIONS

• Fabricating
• Robotic MIG Welding
• Resistance Spot Welding
• Robotic ARC Welding
• Resistance Seam Welding
• TIG Welding
• Washing
• In Process Robotics
• Press Brake
• Burnishing

EQUIPMENT LIST

• Presses from 30 ton to 880 ton
• Resistance (Spot) Welders
• Robotic Arc Welders
• Press Brake
• Burnisher
• Aqueous Parts Washer

PART SIZE RANGE AND PRODUCTION RUN SIZE CAPABILITIES

Contact Luitink Manufacturing, L.L.C., for capabilities on part size and production run size. . Request a Quote

Deep Drawn Metal Stampings l Sheet Metal Stamping l Resistance Spot Welding l Robotic ARC Welding l Resistance Seam Welding l Aluminum TIG Welding Projects l Automotive Metal Stamping l Precision Sheet Metal Fabrication l Sheet Metal Engineering

Ask a Question

click to enlarge images

Automotive Metal Stamping done by Vollrath.

Drawn stainless steel shells are loaded onto the conveyor belt of an annealer that is atmospherically controlled to prevent oxide scale and discoloration on the parts during the annealing process.

Stainless steel parts are processed through an automated pickling/passivating line to remove oxide scale and heat tint discoloration as well as to remove surface contamination.

The pictured robotic welder is used for plasma arc welding parts that require accurate weld locations, repeatability and long weld paths (or for multiple parts with short weld paths). To help reduce part cost, this unit is set up in a cell environment to permit additional operations during welding.

Contact Us about the Automotive Metal Stamping Process by Clicking Here

Call Toll Free 800-984-6343 or
Send Us Your Questions
Request A Quote

©2007 Vollrath